PA66 64C-R美国首诺Vydyne®中粘度注塑挤出用尼龙66塑料（18024445500）
Physical Dry Conditioned Unit Test Method
Density 1.14 -- g/cm³ ISO 1183
Water Absorption (Saturation, 23°C) 8.5 -- % ISO 62
WaterAbsorption (Equilibrium, 23°C, 50% RH) 2.5 -- % ISO 62
Thermal Dry Conditioned Unit Test Method
Melting Temperature 260 -- °C ISO 11357-3
CLTE - Flow (23 to 55°C, 2.00 mm) -- ISO 11359-2
CLTE - Transverse (23 to 55°C, 2.00 mm) -- ISO 11359-2
RTI Elec UL 746
1.50 mm 130 -- °C
3.00 mm 130 -- °C
RTI Imp UL 746
1.50 mm 75.0 -- °C
3.00 mm 75.0 -- °C
RTI Str UL 746
1.50 mm 85.0 -- °C
3.00 mm 85.0 -- °C
Volume Resistivity (0.750 mm) -- ohm·cm IEC 60093
Dielectric Strength (1.00 mm) 23 -- kV/mm IEC 60243
Arc Resistance (3.00 mm) PLC 6 -- ASTM D495
Comparative Tracking Index (3.00 mm) 600 -- V IEC 60112
High Amp Arc Ignition (HAI) UL 746
1.50 mm PLC 0 --
3.00 mm PLC 0 --
High Voltage Arc Tracking Rate (HVTR) PLC 0 -- UL 746
Hot-wire Ignition (HWI) UL 746
1.50 mm PLC 4 --
3.00 mm PLC 3 --
Flammability Dry Conditioned Unit Test Method
Flame Rating UL 94
1.50 mm V-2 --
3.00 mm V-2 --
Glow Wire Flammability Index IEC 60695-2-12
1.50 mm 800 -- °C
3.00 mm 850 -- °C
Glow Wire Ignition Temperature IEC 60695-2-13
1.50 mm 700 -- °C
3.00 mm 700 -- °C
Extrusion Dry Unit
Cylinder Zone 1 Temp. 250 to 295 °C
Cylinder Zone 2 Temp. 250 to 295 °C
Cylinder Zone 3 Temp. 250 to 295 °C
Cylinder Zone 4 Temp. 250 to 295 °C
Cylinder Zone 5 Temp. 250 to 295 °C
Melt Temperature 270 to 295 °C
Die Temperature 270 to 295 °C |
您当前的位置: 首页 > 产品信息 > 产品介绍
