PA6 BKV 25 FN01 000000德国朗盛Durethan 25%玻纤增强无卤阻燃尼龙6塑料（18024445500）

PA 6, 25 % glass fibers, injection molding, halogen free flame retardant, improved flowability



ISO Shortname: ISO 1874-PA6, GFHR, 10-090, GF25; ISO1043-PA GF FR (30+40+72)

Property Test Condition Unit Standard guide value
d.a.m. cond.
Rheological properties
C Molding shrinkage, parallel 60x60x2; 260 °C / MT 80 °C; 600 bar % ISO 294-4 0.3　
C Molding shrinkage, transverse 60x60x2; 260 °C / MT 80 °C; 600 bar % ISO 294-4 0.7　
Post- shrinkage, parallel 60x60x2; 120 °C; 4 h % ISO 294-4 0.1　
Post- shrinkage, transverse 60x60x2; 120 °C; 4 h % ISO 294-4 0.2　

Mechanical properties (23 °C/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 9300 5800
C Tensile Stress at break 5 mm/min MPa ISO 527-1,-2 130 80
C Tensile Strain at break 5 mm/min % ISO 527-1,-2 3.1 6.5
C Charpy impact strength 23 °C kJ/m² ISO 179-1eU 60 65
C Charpy notched impact strength 23 °C kJ/m² ISO 179-1eA <10 13
C Charpy notched impact strength -30 °C kJ/m² ISO 179-1eA <10 <10
Izod impact strength 23 °C kJ/m² ISO 180-1U 50 55
Izod notched impact strength 23 °C kJ/m² ISO 180-1A <10 15
Izod notched impact strength -30 °C kJ/m² ISO 180-1A <10 <10
Flexural modulus 2 mm/min MPa ISO 178-A 9000 5500
Flexural strength 2 mm/min MPa ISO 178-A 205 140
Flexural strain at flexural strength 2 mm/min % ISO 178-A 3.2 5.5
Flexural stress at 3.5 % strain 2 mm/min MPa ISO 178-A　120
Ball indentation hardness　N/mm² ISO 2039-1 183