PA6 BKV 215 W1 902176µÂ¹úÀÊÊ¢Durethan 15%²£ÏËÔöÇ¿Äͺò³å»÷¸ÄÉÆÄáÁú6ËÜÁÏ£¨18024445500£©

PA 6-Copolymer, 15 % glass fibers, injection molding, improved impact strength, weather stabilized



ISO Shortname: ISO 1874-PA 6/66-HI, GLR, 14-040, GF15

Property Test Condition Unit Standard guide value
d.a.m. cond.
Rheological properties
C Molding shrinkage, parallel 60x60x2; 280 ¡ãC / MT 80 ¡ãC; 600 bar % ISO 294-4 0.5¡¡
C Molding shrinkage, transverse 60x60x2; 280 ¡ãC / MT 80 ¡ãC; 600 bar % ISO 294-4 0.6¡¡
Post- shrinkage, parallel 60x60x2; 120 ¡ãC; 4 h % ISO 294-4 0.1¡¡
Post- shrinkage, transverse 60x60x2; 120 ¡ãC; 4 h % ISO 294-4 0.1¡¡

Mechanical properties (23 ¡ãC/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 4400 2100
C Tensile Stress at break 5 mm/min MPa ISO 527-1,-2 85 50
C Tensile Strain at break 5 mm/min % ISO 527-1,-2 4.7 20
C Charpy impact strength 23 ¡ãC kJ/m² ISO 179-1eU 65 100
C Charpy impact strength -30 ¡ãC kJ/m² ISO 179-1eU 80 80
Izod impact strength 23 ¡ãC kJ/m² ISO 180-1U 55 80
Izod impact strength -30 ¡ãC kJ/m² ISO 180-1U 60 60
Izod notched impact strength 23 ¡ãC kJ/m² ISO 180-1A 20 30
Flexural modulus 2 mm/min MPa ISO 178-A 3900 1900
Flexural strength 2 mm/min MPa ISO 178-A 135 65
Flexural strain at flexural strength 2 mm/min % ISO 178-A 5.5 7.5
Flexural stress at 3.5 % strain 2 mm/min MPa ISO 178-A 115 50
C Puncture maximum force 23 ¡ãC N ISO 6603-2 1760¡¡
C Puncture maximum force -30 ¡ãC N ISO 6603-2 785¡¡
C Puncture energy 23 ¡ãC J ISO 6603-2 7.3¡¡
C Puncture energy -30 ¡ãC J ISO 6603-2 3.1