PA6 BKV 35 H2.0 EF 901510µÂ¹úÀÊÊ¢Durethan 35%²£ÏËÁ÷¶¯ÐԸĽøÄÍÈÈÀÏ»¯Îȶ¨ÄáÁú6ËÜÁÏ£¨18024445500£©

PA 6, 35 % glass fibers, injection molding, improved flowability, heat-aging stabilized



ISO Shortname: ISO1874-PA 6, GHR, 10-100, GF35

Property Test Condition Unit Standard guide value
d.a.m. cond.
Rheological properties
C Molding shrinkage, parallel 60x60x2; 280 ¡ãC / MT 80 ¡ãC; 600 bar % ISO 294-4 0.21¡¡
C Molding shrinkage, transverse 60x60x2; 280 ¡ãC / MT 80 ¡ãC; 600 bar % ISO 294-4 0.65¡¡
Post- shrinkage, parallel 60x60x2; 120 ¡ãC; 4 h % ISO 294-4 0.05¡¡
Post- shrinkage, transverse 60x60x2; 120 ¡ãC; 4 h % ISO 294-4 0.15¡¡

Mechanical properties (23 ¡ãC/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 10800 6700
C Tensile Stress at break 5 mm/min MPa ISO 527-1,-2 180 115
C Tensile Strain at break 5 mm/min % ISO 527-1,-2 3.0 6.0
C Charpy impact strength 23 ¡ãC kJ/m² ISO 179-1eU 85 80
C Charpy impact strength -30 ¡ãC kJ/m² ISO 179-1eU 65 55
C Charpy notched impact strength 23 ¡ãC kJ/m² ISO 179-1eA 12 15
C Charpy notched impact strength -30 ¡ãC kJ/m² ISO 179-1eA 10¡¡
Izod impact strength 23 ¡ãC kJ/m² ISO 180-1U 70 75
Izod impact strength -30 ¡ãC kJ/m² ISO 180-1U 60 55
Izod notched impact strength 23 ¡ãC kJ/m² ISO 180-1A 10 15
Izod notched impact strength -30 ¡ãC kJ/m² ISO 180-1A 10¡¡
Flexural modulus 2 mm/min MPa ISO 178-A 10000 5900
Flexural strength 2 mm/min MPa ISO 178-A 275 180
Flexural strain at flexural strength 2 mm/min % ISO 178-A 3.4 6.0
Flexural stress at 3.5 % strain 2 mm/min MPa ISO 178-A¡¡150
Ball indentation hardness¡¡N/mm² ISO 2039-1 210