PA6 BM 240 H3.0 000000德国朗盛Durethan 40%矿物热老化稳定低翘曲尼龙6塑料（18024445500）

PA 6, 40 % mineral, injection molding, heat-aging stabilized, low tendency to warp, isotopic properties

ISO/ ASTM

ISO Shortname: ISO 1874-PA 6, GHR, 14-060, MD40

Property Test Condition Unit Standard guide value
d.a.m. cond.
Rheological properties
C Molding shrinkage, parallel 60x60x2; 280 °C / MT 80 °C; 600 bar % ISO 294-4 0.85　
C Molding shrinkage, transverse 60x60x2; 280 °C / MT 80 °C; 600 bar % ISO 294-4 0.85　
Post- shrinkage, parallel 60x60x2; 120 °C; 4 h % ISO 294-4 0.25　
Post- shrinkage, transverse 60x60x2; 120 °C; 4 h % ISO 294-4 0.25　

Mechanical properties (23 °C/50 % r. h.)
C Tensile modulus 1 mm/min MPa ISO 527-1,-2 5700 2200
C Tensile Stress at break 5 mm/min MPa ISO 527-1,-2 85 55
C Tensile Strain at break 5 mm/min % ISO 527-1,-2 5.5 40
C Charpy impact strength 23 °C kJ/m² ISO 179-1eU 150 N
C Charpy impact strength -30 °C kJ/m² ISO 179-1eU 130 80
C Charpy notched impact strength 23 °C kJ/m² ISO 179-1eA < 10 12
C Charpy notched impact strength -30 °C kJ/m² ISO 179-1eA < 10 < 10
Charpy notched impact strength -40 °C kJ/m² ISO 179-1eA < 10 < 10
Izod impact strength 23 °C kJ/m² ISO 180-1U 130 N
Izod impact strength -30 °C kJ/m² ISO 180-1U 100 85
Izod notched impact strength 23 °C kJ/m² ISO 180-1A < 10 < 10
Izod notched impact strength -30 °C kJ/m² ISO 180-1A < 10 < 10
Flexural modulus 2 mm/min MPa ISO 178-A 5500 2000