PA6 FN727 NC010AÃÀ¹ú¶Å°îZytelÄÍÈÈÀÏ»¯ÄÍ»¯Ñ§µçÀ»¤Ì×½º¹Ü¹Ü²ÄÓã¨18024445500£©
General information Value Unit Test Standard
Resin Identification PA6-F - -
Resin Identification PA6-F - ISO 1043
Part Marking Code >PA6-F< - ISO 11469
Rheological properties dry / cond Unit Test Standard
Viscosity number 55 / * cm&sup3;/g ISO 307, 1157, 1628
Moulding shrinkage, parallel 0.8 / * % ISO 294-4, 2577
Moulding shrinkage, normal 1.2 / * % ISO 294-4, 2577
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 900 / - MPa ISO 527-1/-2
Stress at 50% strain 30 / - MPa ISO 527-1/-2
Strain at break >50 / - % ISO 527-1/-2
Flexural Modulus 880 / - MPa ISO 178
Charpy notched impact strength, 23¡ãC 135 / - kJ/m&sup2; ISO 179/1eA
Izod notched impact strength, 23¡ãC N / - kJ/m&sup2; ISO 180/1A
Thermal properties dry / cond Unit Test Standard
Melting temperature, 10¡ãC/min 221 / * ¡ãC ISO 11357-1/-3
Glass transition temperature, 10¡ãC/min 60 / - ¡ãC ISO 11357-1/-2
Temp. of deflection under load ¡¡ ¡¡ ISO 75-1/-2
1.8 MPa 48 / * ¡ãC ¡¡
0.45 MPa 55 / * ¡ãC ¡¡
Thermal conductivity of melt 0.16¡¡W/(m K) -
Spec. heat capacity of melt 2700¡¡J/(kg K) -
Other properties dry / cond Unit Test Standard
Density 1020 / - kg/m&sup3; ISO 1183
Density of melt 870¡¡kg/m&sup3; - |