无锡宾馆酒店地坪价格是多少 400-0709-910(请拨打400-0709-910电话，永坚地坪公司)

停车场地坪可以设计成环氧地坪，也可以设计成金刚砂耐磨地坪，还可以设计成混凝土加强剂地坪，还有一种复合型的地坪那就是金刚砂地坪+混凝土加强剂地坪，这种复合型的耐磨地坪可以说是***的了，符合停车场地坪耐磨耐用的要求，而且美观。

一、停车场环氧地坪漆设计：
1、环氧停车场地坪设计
停车场地坪漆根据使用要求不同，可分为桔纹防滑型、轻度止滑型和高度止滑型。停车场地坪由停车位、车库过道、止滑坡道三部分涂装施工组成，地下车库的停车位、车库过道涂装，在施工技术要求、施工规程方面与平时普通的环氧薄涂、环氧砂浆平涂没有什么区别，可以参照平时环氧地坪设计与施工。

停车区对于平整地面，可采用0.5mm环氧薄涂，而平整度及表面强度较差的地面，可以采用1-3 mm环氧砂浆平涂，**要求可采用1-3mm环氧自流平地坪，车行通道由于车行驶频繁，相对于停车区，设计要加强，可采用1-3mm环氧砂浆平涂。通道和车位可以设计成两种颜色，也可以一种，到时候可以在上面画线区分。

1、金刚砂地坪的工艺特点
增强混凝土地面的耐磨性、耐冲击性和强度；极大提高了混凝土的密度，使其减少起尘，增加了地面的防油性；形成了一个高密度、易清洁、抗渗透的地面；与混凝土基层一起施工，施工工期短。

2、金刚砂地坪的适用范围
用于很高耐磨且不起灰尘要求的混凝土地面，例如：停车场、地下车库、工业厂房、仓库、码头及需要统一色彩提高工作卫生环境和美观的地方。

3、金刚砂耐磨地坪的工艺原理
地坪硬化剂是由骨料、特种水泥、其它掺合料和外加剂组成，将其撒布在初凝阶段的混凝土表面上经过加工与混凝土形成一个整体的硬化地面，且表面形成一个高密度、易清洁、抗渗透的面层。

4、金刚砂地坪材料用量：
金刚砂硬化剂：含量为6kg/m2，厚度为3-4 mm

5、金刚砂地坪施工机械：
整体粉光机、钢抹子、圆角抹子、木抹子、平整梁。

6、金刚砂地坪施工工艺：
基层平整度验收→粉光机振实→刮平→**次撒布金刚砂硬化剂材料→机械粉光机揉压抹平→刮平→第二次撒布金刚砂材料→机械粉光机揉压抹平→边角压光→整体压平抛光→锯缝、养护

7、金刚砂地坪对基层混凝土要求
Parking epoxy floor can be designed, can be designed to carborundum wearable Floor, can also be designed to strengthen the concrete floor agents, there is a complex type that emery floor concrete floor + booster floor This complex of wear-resistant flooring can be said is the most perfect, and in line with wear-resistant and durable floor parking requirements, and appearance.
 
First, the parking epoxy floor paint design:
1, epoxy floor parking lot design
   Parking lot floor paint according to requirements can be divided into orange-peel slip type, type and height mild slip slip type. Parking floor from the parking garage aisles, slip ramp construction composed of three parts, paint, underground parking garage, garage aisle painting, construction technology requirements, construction regulations and the usual aspects of ordinary epoxy-coated thin epoxy mortar Ping Tu no difference, reference is usually epoxy floor design and construction.
 
   Parking area for flat ground, can be 0.5mm thin epoxy coating, and poor surface flatness and strength of the ground, can be used 1-3 mm epoxy mortar Ping Tu, high-level requirements can be 1-3mm epoxy self-leveling floor , dealers channel due to the vehicle with frequent, with respect to the parking area, designed to strengthen, may be 1-3mm epoxy mortar Ping Tu. Channel and parking spaces can be designed in two colors to be one of the top drawing a line when you can distinguish.
 
1, Emery Floor of process characteristics
   Reinforced concrete ground abrasion resistance, impact resistance and strength; greatly improve the density of concrete, reducing it from the dust, increase defense oily ground; forming a high-density, easy to clean, anti-infiltration of the ground; and Together concrete base construction, short construction period.
 
2. Scope of Emery Floor
   For high wear and can not afford the concrete floor dust requirements, such as: parking, underground garage, industrial plants, warehouses, docks and the need for a unified color improve sanitary conditions and beautiful place.
 
3, the process principle of carborundum wearable Floor
   Floor hardening agent is aggregate, special cement, admixture and other admixtures composition, which was sprinkled on the concrete surface after the initial setting stage of processing and hardened concrete to form a whole floor, and the surface to form a high density, easy to clean and impervious surface.
 
4, emery flooring materials consumption:
Emery hardener: content of 6kg / m2, a thickness of 3-4 mm
 
5, emery floor construction machinery:
Overall powder-ray machines, steel trowel, rounded trowel, wood trowel, flat beams.
 
6, Emery floor construction process:
Base flatness acceptance → pink light machine tap → Calibrating → first spreading emery hardener material → mechanical pink light machine kneaded erase → Calibrating → second spreader emery material → Mechanically kneaded smooth pink light machine → corner calender → overall flattened polishing → kerf, conservation
 
7, emery concrete floor grassroots requirements

资讯来源：<联系电话:400-0709-910>