吨袋厂家:在整个应用过程中，吨袋制造商和塑料编织袋的质量非常重要。

T-Bag manufacturer: in the whole application process, the quality of T-Bag manufacturer and plastic woven bag is very important.

如何确保塑料编织袋的质量？

How to ensure the quality of plastic woven bags?

塑料编织袋的质量应从生产开始就开始爬行。

吨袋厂家
The quality of plastic woven bags should start from the beginning of production.

以下吨袋制造商将让您知道如何提高塑料编织袋的质量。

The following ton bag manufacturers will let you know how to improve the quality of plastic woven bags.

根据加工顺序，缝制规格指定为±1CM，针迹长度为0.7- /针0.9厘米。

According to the processing sequence, the sewing specification is specified as ± 1cm, and the stitch length is 0.7 - / stitch 0.9CM.

请按照指定使用缝纫线。

Please use sewing thread as specified.

禁止重叠缝合线，肥料板泄漏，浮线，带扣环泄漏，腋窝等。

Do not overlap suture, fertilizer plate leakage, floating line, leakage with buckle, armpit, etc.

左，右线松散且相同。

The left and right lines are loose and the same.

塑料编织袋的角度必须在10厘米以内。

The angle of plastic woven bag must be within 10 cm.

在主体和底端之间的连接处，应进行双折比较，并缝制三根线。总宽度为2CM。禁止有明显的皱纹。线和线是匀称的，不是重合的，并且针被压在针上。

At the connection between the main body and the bottom, double fold comparison shall be carried out and three threads shall be sewn. The total width is 2cm. No obvious wrinkles. The thread and thread are symmetrical, not coincident, and the needle is pressed on the needle.

提布，盖布，菊花10CM×10CM，禁止除线，热熔。

Jacquard, cover cloth, chrysanthemum 10cm × 10cm, no wire removal, hot melting.

缝制塑料编织袋的起始针必须在同一手术缝合线上重叠5CM停止针按压针，将布针向上抬起于针的左上角，缝合距离为1CM，接缝原料袋为针侧缝纫线结的长度不应超过1.5CM。

The starting needle for sewing plastic woven bag must overlap 5cm on the same surgical suture, stop pressing the needle, lift the cloth needle up to the upper left corner of the needle, the suture distance is 1cm, and the length of sewing thread knot on the needle side of the seam material bag shall not exceed 1.5cm.

禁止将吊带背心，起重布和布进行交错，接缝，接缝和接缝。

It is forbidden to stagger, joint, joint and joint the vest, lifting cloth and cloth.http://www.sdrysbzgs.com/

资讯来源：www.sdrysbzgs.com